VESSELS: Carpe Diem I (glazed)

Carpe Diem I

hand-built stoneware (ceramic) platter

1 in H x 11.5 in W x 18 in L

Carpe Diem I was glazed and fired back in May. I'm just now catching up on labeling and organizing a backlog of digital photos of my recent work.

The front of this platter is glazed with Cone 6 slate blue--painted on, not dipped--the back is olive light. Because slate blue tends to run we only use it on insides, flat or highly textured surfaces of vessels. A perfect choice for this application.

I'm very please with the way this glaze accentuates the textures and designs. Because it tends to run, it flows into crevices, darker where it pools, lighter and mottled where thinner over raised surfaces. This color variation gives the feeling of a shimmering fish just pulled from the ocean.

The body of Carpe Diem I is only 1/4 inch thick, much too thin for its size and the weight of the decorations. When I first rolled the slab for this piece back in April my intention was to make a platter using only the texture of hand crocheted laced for decoration. Then the clay began drying too quickly, cracking along the edges as I shaped it. It was clearly calling for fins and a tail.

As it dried, I struggled to keep it from warping and the cracks from reappearing. This battle was only partially won by the artist through hidden reinforcement and patience, allowing it to dry slowly, misted and covered, over several weeks.

It did warp some when the fins and tail drooped during bisque and glaze firing, but not so much as to ruin the piece. I just won't mention the small cracks near the tail, a defect that is more cosmetic than structural.

Carpe Diem II will be better.

I'm looking forward to playing with this design again.

Future fish, if made in any quantity, will have to be slightly smaller. This first one was 20 inches long when the clay was still wet, 18 inches end-to-end after firing and shinkage. It had to be fired at the community center because it was too large to fit in my 18 inch diameter kiln. They're willing to accommodate a large piece or two occasionally, but would frown on an entire school of fish platters swimming through at the same time.

Still, I'm glad I didn't let the proportions of this first Carpe Diem get in the way of experimentation on that day back in April.

I've heard it said that we learn more from our failures than from our successes. I would call this a successful failure. Or a failure turned success. Or just a success.

Lessons learned. Good results. That's a success.

(c)2010 Kay Pere ~ Effusive Muse Publishing

VESSELS: Carpe Diem I (in progress)

Sometimes during the creative process, unforeseen problems can become the impetus to try something different from what was originally envisioned.

I didn't plan to make this platter into a fish, but a couple of mistakes while trying a new idea--slab rolled too thin, edges allowed to become too dry too quickly--lead to several unmendable cracks along the rim. Cracks called out for reinforcement. Fins were added (shhhhh, don't tell anyone why) and the crocheted lace texture became scales of a fish.

It's been a long time since I've been over to the community pottery studio to use the slab roller. The clay and I have to make friends with each other again.

I wanted to work on something start to finish today.

I decided that the small time I had would be enough. With just a few voice students this evening, they would have to understand if I wore my smudged pottery clothes during their lessons. They've all known me for a while and the quality of their lesson experience would be unaltered by a few smears of clay on well worn clothes. Perhaps it would even be an inspiration for someone to try an artistic pursuit, an encouragement to see that there are things more important than outward appearances.

Once a pottery project is begun, the clay only stays in optimal working condition for a period of hours. Even when carefully wrapped in damp towels and sealed in a plastic bag, the moisture begins to shift, the texture gradually changes. Once past a certain point, malleability is unrecoverable.

I've had the experience too many times of not being able to get back to something I've begun, losing momentum, and eventually losing the piece when it got to dry to be recovered and completed. Too many times I've had to break an incomplete object, already bone dry, into pieces for the scrap recycling bucket.

The title, Carpe Diem, comes from the movement I've been making toward working more directly on my goals each and every day, even if the time available is much shorter than I would like.

No more waiting for the right moment, for the convergence of mood and uninterrupted hours.

As Dr. Seuss wrote in "Oh! The Places You'll Go!"

Waiting for the fish to bite or waiting for wind to fly a kite.

Or waiting around for Friday night

or waiting perhaps for their Uncle Jake

or a pot to boil or a better break

or a string of pearls or a pair of pants

or a wig with curls

or another chance.

Everyone is just waiting.

No! That's not for you!

For too long, I've waited for just the right moment to get started again making pottery just for fun, or writing songs, or recording, or working on my "big writing project".

Just the right moment never comes. What we have is today.

So don't carp!

Carpe Diem!

PROLIFERATION: Photo CD

The most recent result of graphics work. Finished this morning. Disk burned and labeled, ready to put together with an application to send out tomorrow.

PROLIFERATION: Business Cards

Just finished this new business card design for Sacred Shards Pottery. Sent off to www.vistaprint.com just a couple hours ago.

It's layout was set up with the intention of dual use--business card and sales tag. To make a sales tag the card will be folded in half along its vertical axis (between the heart bowl and the snail spiral), hole punched in that corner and attached to the item with a piece of raffia.

Didn't pay to expedite printing and shipping, so the new cards will be arriving in about 3 weeks.

The Sacred Shards Etsy URL printed on the cards has been reserved, but yet to be set up as of this date. Now there's an incentive to get it going!

VESSELS: Ammonoidea I - SOLD!

Title: Ammonoidea I

hand built pitcher

14"L x 8 1/2"H x 5" W

embossed designs from handmade stamps & texture plates

stoneware clay, cone 6 glazes

SOLD 02/2010

I went down to the Mystic Art Center today to take pictures of the piece I have in my first members show and discovered IT SOLD!
I thought I had set the price high enough that I'd be bringing it home with me at the end of the show. A price high enough that, in the unlikely event it sold, I'd feel sufficiently compensated so as to not regret letting go of it. And IT SOLD! Whoever you are, thank you!
This was the first time I'd entered the member's show, having felt intimidated in the past by the quality of the work displayed there.
This year I said to myself, "What the heck! Might as well try." Glad I did. It's been a positive experience all the way around.

Story of "Ammonoidea I":

"Ammonoidea I" was formed during a summer thunder storm that gathered as I worked out in my art barn. It's slabs and textures were rolled and shaped entirely by hand. It holds for me the magic of that day. My workbench was a garden cart topped with a piece of plywood, lightning flashing, thunder rolling and rain falling all around as I worked.

The design on the "Ammonoidea I" was made with an original texture plate adapted from a photo of a fossil ammonite, an extinct marine animal, in the Smithsonian collection. I found the reference photo in a desk calendar sent to me by my mom.

The slab of clay used to make the texture plate had dried to the point that it was too firm for shaping into anything else. Rather than break it up for the scrap bucket, it became a useful tool for creating decoration on other pieces. Using a ball stylus and a sgraffito tool I drew the ammonite design into the slab, going over the lines until they were of sufficient depth. This incised slab was then bisque and high fired for durability.

The other texture plates used to emboss the designs on the pieces near the handle and spout were similarly inscribed on scraps left over from other projects, bisque and high fired.

All of these texture plates were made with no particular purpose or finished result in mind. I was simply playing with design, line and materials. The process developed over many months, long before the Ammonoidea vessel was begun.

Texture plates were selected, then slabs of wet clay were then pressed into the texture plates using a rolling pin. The components were cut to shape and joined. I continued to shape the assembled vessel as it dried. It was bisque fired, hand glazed (the glazes where meticulously painted into the ammonoid design by hand, painted, dipped and poured on other surfaces), then fired to cone 6.

All this was before I had my own kiln. Firing and glazing took place at the Stonington Community Center pottery studio, also know as the COMO, where I'm an independent potter.

Patterns for this piece were drawn with sharpie marker on durable plastic quilt pattern grids and cut out, used and reshaped to reflect the eventual outlines of the components as they developed. This will enable me to create other pieces based on this design.

When I glaze, I like to let some of the bare clay show through. I'm drawn to the raw, earthy quality of the unglazed surfaces as they contrast with the high sheen of the glazed surfaces. The unglazed surfaces are intended to extend the connection between the ammonite fossil that inspired this design and earth that sheltered it for millennia. It represents our own origins within the earth, "ashes to ashes, dust to dust," our dependance on earth as our home. The blues and greens of the glazes are ocean, symbolic of the collective unconscious in which we all unknowingly swim. The spiral shell design reflects my understanding of the spiral journey of life.

My work is all about connecting past with present: unearthing artifacts within ourselves, finding beauty and meaning in unexpected places, then shaping a vessel within to hold these. For me, this piece captures all these elements in one unified whole.